A-pillar Gauge Pods - Page 2 - Nissan-Navara.net
Interior Mods Including In Car Entertainment, seat covers, satellite navigation

Reply
 
LinkBack Thread Tools
post #11 of 71 (permalink) Old 17-07-15, 11:11 PM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods

Perfect! Thank you mate

Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
Sponsored Links
Advertisement
 
post #12 of 71 (permalink) Old 05-08-15, 02:24 PM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods

Quote:
Originally Posted by digga_hole
Boost gauge is easy just T into the boost sensor pipe work and run pipe into cab and to Guage, oil gauges are a little harder, a sandwich plate won't fit between filter and houses, and a relocation of oil filter with the relevant kit will mean removing oil filter housing and cutting the pipe shorter! Unless someone knows of a simpler way of getting the pressure/temp senders plumbed in
Hi mate,
Finally getting this sorted, is there anyway (photo or anything) you can help me which is the Boost Sensor Pipe I need too T into?

I am thinking of getting a Volt and Bar sensor from these?

http://www.ebay.co.uk/itm/281748619459? ... EBIDX%3AIT

Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
post #13 of 71 (permalink) Old 05-08-15, 04:09 PM
Fully run in and going strong!
 
digga_hole's Avatar
 
Join Date: Jul 2011
Location: Pembrokeshire
Posts: 3,401
Garage
Re: A-pillar Gauge Pods

On the drivers side of the intercooler is where the sensor is, with a rubber tube on it. I'm not on the computer otherwise would show you the manual diagram, I do believe it is on the forum somewhere tho. Any way when you have found this rubber hose, you need to cut it in the middle and insert the T piece so as to rejoin the pipe and allow you to run an extra length into the cab for boost gauge

2008 (57) D40 Navara Manual

BILLCAR'd Duplex Timing Chain
digga_hole is offline  
post #14 of 71 (permalink) Old 05-08-15, 05:38 PM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods

Ok mate thanks, I will see if I can find it on the diagram tonight.

Can you just use a plastic T piece or is the pressure too much for that etc? then just secure the t piece in place with some zip ties, can see the diameter being to small for anything else.

Did you come through the main wiring plug hole in the drivers footwell bulkhead?

Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
post #15 of 71 (permalink) Old 05-08-15, 10:39 PM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods

Hi mate,

Is this it?

If so how big has the T piece got to be

[attachment=0:9p10z725]Untitled.png[/attachment:9p10z725]
Attached Images
File Type: png Untitled.png (31.8 KB, 45 views)

Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
post #16 of 71 (permalink) Old 06-08-15, 12:14 AM
Fully run in and going strong!
 
digga_hole's Avatar
 
Join Date: Jul 2011
Location: Pembrokeshire
Posts: 3,401
Garage
Re: A-pillar Gauge Pods

Yeah that looks like the one, not sure on size as mine came with the boost gauge, and fitted, and I would have to check where I ran it, it was somewhere on drivers side

2008 (57) D40 Navara Manual

BILLCAR'd Duplex Timing Chain
digga_hole is offline  
post #17 of 71 (permalink) Old 06-08-15, 12:28 AM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods

Sorry mate, you mean the T piece came with your gauge?

If so, hope mine does too!

Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
post #18 of 71 (permalink) Old 06-08-15, 09:22 AM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods

So I bought these last night

Apparently they come with instructions so thats good HAHAHA

[attachment=2:3tbkgpbz]1.jpg[/attachment:3tbkgpbz]
[attachment=1:3tbkgpbz]2.jpg[/attachment:3tbkgpbz]
[attachment=0:3tbkgpbz]3.jpg[/attachment:3tbkgpbz]
Attached Images
File Type: jpg 1.jpg (27.4 KB, 37 views)
File Type: jpg 2.jpg (5.4 KB, 32 views)
File Type: jpg 3.jpg (4.8 KB, 31 views)

Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
post #19 of 71 (permalink) Old 06-08-15, 10:54 AM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods

Also, where about do you reckon I should T into the pipe?

About here where I have marked?
[attachment=0:18gtjgrb]Untitled.png[/attachment:18gtjgrb]
Attached Images
File Type: png Untitled.png (32.0 KB, 31 views)

Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
post #20 of 71 (permalink) Old 06-08-15, 01:01 PM Thread Starter
On the motorway!
 
Markyt1984's Avatar
 
Join Date: Nov 2013
Location: Solihull, Birmingham
Posts: 1,006
Re: A-pillar Gauge Pods


Mark
-------------------
'05 2.5Dci D40 Euro 3 Aventura-Man
EGR Blank/Heko Wind Deflectors/Stainless Steel Roof Bars/Reversing Camera/Light Bar-4xWipac 8"100w/Stebel Nautilus Horn/40mm Body Lift/40mm suspension lift/50mm spacers, SMF Exedy Con Kit...
Markyt1984 is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Nissan-Navara.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Image Verification
Please enter the six letters or digits that appear in the image opposite.

Registration Image


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome