Fully run in and going strong!
Join Date: Feb 2009
Location: Winkfield Berkshire
Re: SNUGTOP LOCK
There is no replacement other than from Snugtop however you can overhaul yours.
The number for the key required is stamped on the lock face so you can get one cut to fit.
To repair the 'push to lock' mechanism, remove the 2 pozzi screws and the wire locking 'C' shaped clip from the housing. Pull out the handle/lock assembly and note which way the push spring is fitted.
The 'push and lock system' can be fixed on assembly by fileing the brass peg and the recess it fits into square again as these rounded off edges stop it from locking.
Sounds complicated but you'll understand it as you dissmantle the assembly.
2004 D23 Double Cab,DTE-VPC Chip,Stainless 3" Toyo sports exhaust,Monroe Adventures,Free Wheel Hubs,EGR blanked,30mm offset maxXtrac wheels,Hankook RF10ís,3x DVD monitors,front flip ICE,speaker up-grade,reverse Camera,130K since mod and going strong!