Fully run in and going strong!
Join Date: Mar 2013
Location: Dunfermline Fife
Re: drivers inside door lock
From memory, A Blunt lever (plastic bike tyre lever or similar) Gently lever up the section of your armrest you grip to close the door upwards. Lever the trim around the inner door handle off ( Mine's silver ) next behind the door handle is another plastic cover lever this off also. Now you should be able to see 3 10mm bolt heads, 2 at the armrest and the one behind the door handle. Next lever the window switch panel off, Now take the bolts off and go around the outside of the door panel levering off the pops. Pull the panel straight up so as to clear the window rubber, Undo the wire loom for the window switches and hey presto one door panel. Enjoy and good luck
He who hesitates is in the wrong job.
12,000lb plasma front.9,500lb plasma rear winches
OME full set up,40mm body lift,Km2's.
25mm+38mm (rear) wheel spacers.
N&J liner and toolbox's
Full HID+Led lighting rig + a bit more besides.
09 Outlaw (leather)