Nissan-Navara.net banner

1 - 5 of 5 Posts

·
Registered
Joined
·
53 Posts
Discussion Starter #1
Guys

I'll ask these two questions in the one post (if you don't mind).
When on full lock, the clanking thats heard, which is the lock bottoming out, what is the fix for this ? Can i buy something from Nissan that just fits on replacing the worn parts?
Secondly, Is there a grommet anywhere giving access to the cab from outside the vehicle, I have a reversing camera that I want to fit but don't know where the access in would be, it would have to be about 12mm dia as the plug on the unit is that size.
The vehicle is an 05 plate double cab.

Incidently I have a couple of spare units I could pass on too.

Thanks for any further info.
 

·
Registered
Joined
·
976 Posts
simply don't go hard full lock. you will only wear the **** out of the stops (you proberly have allready worn the plastic caps off). also keep it well greased.
 

·
Registered
Joined
·
534 Posts
No problem replacing the plastic caps, they only a few quid from your dealer.
Once you have the new ones on, just keep them well greased.

Cheers

Kallie
 

·
Registered
Joined
·
534 Posts
Hi,

Here is a photo of the caps-stopper and UK part no: 400392S610
£2.53 each which I got from the dealer.

Cheers

Kallie

 

·
Registered
Joined
·
53 Posts
Discussion Starter #5
Many thanks for your help guys, this is what makes a good forum better.
Hope I can help you all out sometime.
 
1 - 5 of 5 Posts
Top