P0581 means that there is lack of continuity in the clock spring, but that shouldn't affect starting.
Have you tried squeezing the fuel primer bulb to see if it gets hard?
Cranking but not starting
Hi everyone
I have an issue with my 2007 nissan navara d40 2.5 DCi , the car cranks but will not start, i ran a scan on it and i get code P0581 "Cruise control multi-function input "A" circuit high but the funny part is my car has no cruise control. what could this mean, i need the car running please assist.
Thanks in advance
I have an issue with my 2007 nissan navara d40 2.5 DCi , the car cranks but will not start, i ran a scan on it and i get code P0581 "Cruise control multi-function input "A" circuit high but the funny part is my car has no cruise control. what could this mean, i need the car running please assist.
Thanks in advance
1 - 4 of 4 Posts
Have you tried squeezing the fuel primer bulb to see if it gets hard?
yes i did, it gets very hard then after some minutes it gets soft againP0581 means that there is lack of continuity in the clock spring, but that shouldn't affect starting.
Have you tried squeezing the fuel primer bulb to see if it gets hard?
That's what it is supposed to do.yes i did, it gets very hard then after some minutes it gets soft again
You could try spraying some kind of easy start aerosol into the intake manifold, you will need to pull off the air intake pipe to spray it in.
Actually any aerosol using propane as the propellant will do (wd40, hairspray etc)
1 - 4 of 4 Posts
Nissan-Navara.net
A forum community dedicated to Nissan Navara owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, maintenance and more!
Full Forum Listing
