[Pasky]

2 x D40's all greased up and working well, thanks very much Ian for your help, much appreciated, now to do a how to! :thumbleft:

 

[Pasky]

2 x D40's all greased up and working well, thanks very much Ian for your help, much appreciated, now to do a how to! :thumbleft:

Here's the how to, hope it helps, and thanks again to Ian for the guidance!
http://www.nissan-navara.net/viewtopic.php?f=15&t=27942
Cheers
Joe

 

[elitetech]

Top bombing!

 

[pommie]

Thanks Elitetech I have the same problem on my 2010 stx

 

[Ashlucas]

Excellent video! you can see the tracks which are greased i'm talking about.
It's the white plate you'll need to grease up, front and rear.

Take note of the actuator arm positions before sliding it all off...
Remember to put the left actuator arm into the track when you put the white plate back on!

I can't seem to unbolt my actuator from black plastic to white. The motor is seemed to be pressed on. ? Or am I doing something wrong? There is clips holding the actuator together, I removed and a bunch of plastic gears and a chipboard fell out. So I put back together quickly and am stuck on what to do now? Any help would be appreciated greatly

 

[Ashlucas]

Here's the how to, hope it helps, and thanks again to Ian for the guidance!
http://www.nissan-navara.net/viewtopic.php?f=15&t=27942
Cheers
Joe

Is this how to still available? The link seems to have expired

 

[landmannnn]

Is this how to still available? The link seems to have expired

I can't find it, but the first post on page 1 gives a pretty good description of the job.

 

[Ashlucas]

I can't find it, but the first post on page 1 gives a pretty good description of the job.

Not sure mate but I've removed the whole unit and this noise is still staying strong