Nissan-Navara.net banner

1 - 14 of 14 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Hi everyone

I have 2010 SE Navara double cab QR25DE petrol 2wd with check engine light on. I tried to connect generic elm 327 wifi but I get different warning messages from different apps like this message: ECU problem The ECU is reporting that it does not support the reading of any PIDs. Your vehicle may not OBD2 compliant or the vehicle ECU has not been enabled by your dealer or manufacturer for OBD2 access. Torque will probably not be able to retrieve information due to this problem.

however it still connects but give very little data and testings. the more confusing issue is giving the error code p0850 and when I look up this code in google I get this: A P0850 diagnostic trouble code means that the computer is not sure whether or not the transmission has been shifted into a neutral gear or park.

but my transmission is manual and there is no park position in the first place.

if anybody can explain why my ECU not providing data to the scanner or why it's giving non applicable error code?

Thank you all
 

·
Administrator
Joined
·
13,137 Posts
Strange, I know the D22 was not obd compliant.
I wasn't aware that you could buy a 2 wheel drive or a petrol in Europe, I think you are in Belgium?
Could your vehicle have been imported?
 

·
Registered
Joined
·
60 Posts
Strange one indeed, I would be inclined to try disconnecting the battery overnight and reconnect see if that cures it also only a thought if you have cruise control there maybe a neutral position switch on the gearbox check the connection and wiring or the switch itself.
 

·
Registered
Joined
·
3 Posts
Hi Navanew, a lot of manual gearbox have a neutral switch as well as auto gearbox’s. Don’t get confused with the revers switch. Defiantly worth a check.
 

·
Registered
Joined
·
8 Posts
Discussion Starter #10
Hi Navanew, a lot of manual gearbox have a neutral switch as well as auto gearbox’s. Don’t get confused with the revers switch. Defiantly worth a check.
Hi and thank you for the enlightenment because I did not know about that
 
1 - 14 of 14 Posts
Top