Nissan-Navara.net banner

Fit NP300 Roller Shutter on a D40

147 Views 5 Replies 3 Participants Last post by  Superod
HI everyone,

I'm quite new here and I recently acquired a Navara D40 2008. Finding a decent used shutter cover for it is proving a bit of a challenge, so I was wandering if a NP300 Roller Shutter can be fitted on a D40. Ideally one with a Roller Bar or has provision for it. I have searched for this info in previous posts and couldn't find any, so any help or advice in this area would be highly appreciated. Another thing I was wandering about is whether it can be retro-fitted with a reverse camera, as I noticed similar models have it.

Thanks.
1 - 6 of 6 Posts
Dont know for sure about the roller but I know the canopys dont fit so doubt if the roller will
Dont know for sure about the roller but I know the canopys dont fit so doubt if the roller will
Thanks for your response which is very helpful. I just wanted to ask if the size was too big or too small? Can it be modified or adjusted?
The D23 tub is a bit bigger. Not sure if you could modify it, but since roller tops are notorious for leaking I would suggest that modifying would make it worse.

Actually feedback from many on here is that roller tops are unsatisfactory. Apart from leaking, their security is poor and you lose the option to strap something larger to the top of it.
The D23 tub is a bit bigger. Not sure if you could modify it, but since roller tops are notorious for leaking I would suggest that modifying would make it worse.

Actually feedback from many on here is that roller tops are unsatisfactory. Apart from leaking, their security is poor and you lose the option to strap something larger to the top of it.
Thanks for your response. Much appreciated.
1 - 6 of 6 Posts
Top