Nissan-Navara.net banner

1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hi there,
Bit of an issue was trying to bleed the cooling system and I think I broke the bleed nipple.
There’s was like a rubber bung on a tee piece no plastic screw.
Does anyone know a part number for this? And also how do I disconnect the aluminium pipe marked in arrow blue

thanks a mil for your help
63906
63907
474EB18C-8597-479C-970F-F59AA9188C3C.jpeg
722A0E8E-56C6-456F-9B52-91B4E585E219.jpeg
722A0E8E-56C6-456F-9B52-91B4E585E219.jpeg
 

·
Administrator
Joined
·
12,344 Posts
I suspect the plastic and metal parts are one assembly and are joined permanently.
I don't think you have many options, either to find a used part from a breakers or go to Nissan and pay out a large amount of money.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
Thanks for your reply. I’ve had a proper look it is one part but the tee piece and the 90 angle are not connected together if that makes sense!! It’s just a 90 bend with a tee piece as one part. So I’m going to run a new hose by passing the 90 bend with a new joiner with a bleed screw on it I’ll try get some photos and put it on
 
1 - 4 of 4 Posts
Top