Nissan-Navara.net banner

1 - 11 of 11 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1 (Edited)
I will post this mainly as a picture guide.
I am no professional so it is all at own risk.
I had to cut in the grill to finish it like this so think twice before doing it yourself.

I bought a Stedi ST3K 21.5 inch ledbar as this had the needed dimensions. Complementary I bought the Stedi dedicated np300 harness and Nissan style short switch from Stedi.

Everything seemed first class quality to me and it was plug an play.

It took me 5hrs to find a nice solution and install excluding the time to prepare the grill.

Disconnect battery



Remove battery box



Install Stedi piggyback



Pierce thru bulkhead



Verstuurd vanaf mijn SM-G930F met Tapatalk
 

·
Registered
Joined
·
50 Posts
Discussion Starter #2 (Edited)
Make this

Use it later like this

Pierce long one thru bulkhead from inside

View on other side


Verstuurd vanaf mijn SM-G930F met Tapatalk
 

·
Registered
Joined
·
50 Posts
Discussion Starter #3
Push short one over and thru rubber

Pull switch cable thru

Use Stedi switch

Or use Nissan style switch


Verstuurd vanaf mijn SM-G930F met Tapatalk
 

·
Registered
Joined
·
50 Posts
Discussion Starter #4 (Edited)
Attach relay as shown

Attach piggyback connector to harness

Test connections

Pull back tube to waterproof cable passing thru


Verstuurd vanaf mijn SM-G930F met Tapatalk
 

·
Registered
Joined
·
50 Posts
Discussion Starter #5
Prepare grill and remove upper horizontal bar.

Cut space for sliding brackets thru

Connect brackets to side of ledbar.

Drill holes and fix brackets .


Verstuurd vanaf mijn SM-G930F met Tapatalk
 

·
Registered
Joined
·
50 Posts
Discussion Starter #6
Install grill again.

It will be a tight fit

Tidy up and tuck away harness cables.

Admire your work and adjust inclination ledbar if necessary.


Verstuurd vanaf mijn SM-G930F met Tapatalk
 

·
Registered
Joined
·
50 Posts
Discussion Starter #7 (Edited)
Depending on angle of light you can see the ledbar or not.

Use Stedi button to (dis)connect ledbar with high beam.


If you want to use the ledbar without high beam you will have to connect a secondary (or only) traditional harness with another relay and switch to the ledbar.
 

·
Registered
Joined
·
50 Posts
Discussion Starter #9
Thanks, very helpful.
I decided on the full NP300 harness from stedi too, and it will be with me in a couple of weeks.
Did you order it online at the stedi website?
Got my stuff in 3 days in Belgium. They ship worldwide with 3day DHL delivery.
Total price 203€

Verstuurd vanaf mijn SM-G930F met Tapatalk
 

·
Super Moderator
Joined
·
4,309 Posts
Impressive write up thankyou for taking the time :thumbright:
 

·
Registered
Joined
·
37 Posts
Did you order it online at the stedi website?
Got my stuff in 3 days in Belgium. They ship worldwide with 3day DHL delivery.
Total price 203€

Verstuurd vanaf mijn SM-G930F met Tapatalk

Yes, ordered it from Stedi, but had it delivered to my nephew in Brisbane. He's coming over in 2 weeks, so that saves a bunch of delivery cost. All in 36 GBP.


Add a cheap assed £20 - 20" light bar and a DT2 connector £2 , plus an OE lightbar switch £3.


Fingers crossed it all works as expected :)
 
1 - 11 of 11 Posts
Top