[Carrot]

Hi can any one please tell me what is involved in removing the cab from a 2007 2.5 twin cab

 

[landmannnn]

Nobody has asked before!

Usual stuff I suppose.

Strip the front panels, disconnect cooling, Aircon, heater pipes, brake master and clutch master cylinder pipes, steering, gearstick, electrics, unbolt the 6 body mount bolts and lift the body off.

 

[gfromleeds]

It's not a 5 minute job that's for sure! What's the reason you need to split them?

 

[Carrot]

I need to as the rear cab mounts need replacing I just thought to do it properly I would need to take the cab off. .but I am now thinking if I take the tub off and unbolt the cab I can lift it enough to do them as its the to back one's that need doing the rest are fine so is the chassis. I have a two post lift so I think this will be the best option

It's not a 5 minute job that's for sure! What's the reason you need to split them?

 

[gfromleeds]

If your not removing the cab completely you might be able to just unbolt it and lift it an inch or 2 to replace the mounts without disconnecting all the wire pipes ect......