Nissan-Navara.net banner
1 - 8 of 8 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Please help!
Nissan Navara 2.5, D22, 2002, yd25.
ECU: Zexel 407917-072 0
My car doesn't start, immobilizer problem.
I'm looking for a solution to fix it, to get around it.
Thanks for the help!
 

·
Administrator
Joined
·
15,146 Posts
Have a read here

I would start with the basics.
1. Air in fuel, leaking/loose pipes, mine even suffered from a porous diesel filter that let air in overnight.
2. D22's are well known for the immobiliser codes from the key to the receiver dropping out for NO apparent reason, more likely after a rebuild or period of no usage.
Good luck,
Chris
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 ·
Have a read here
Thank you very much for your kindness and prompt reply!
The car did not start after a short stop.
The immo control LED is lit continuously.
Reading the error code also brings the error.
Can the system be avoided somehow?
 

·
Administrator
Joined
·
4,897 Posts
Have you tried a ecu reset?
Just disconnect the battery and switch the ignition on ( while battery disconnected to drain the residual power)
Then hook back up and try it!
It's a free test so worth trying!
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
Have you tried a ecu reset?
Just disconnect the battery and switch the ignition on ( while battery disconnected to drain the residual power)
Then hook back up and try it!
It's a free test so worth trying!
I tried it. Unfortunately, it doesn't work.
The writing of eeprom 24c02 and 27c010 follows.
 

·
Administrator
Joined
·
4,897 Posts
Oh wow I would not have thought of that!
Good to know that's a potential issue for future reference 👍
 
1 - 8 of 8 Posts
Top