Nissan-Navara.net banner
1 - 2 of 2 Posts

·
Administrator
Joined
·
5,052 Posts
Discussion Starter · #1 ·
Morning guys after the hot weather we've had in the last few months I've noticed the lacquer peeling on my bonnet!
Liquid Sky Water Cloud Tints and shades

Now this is on an area where a bird dropped one a few years ago that must have been a mutant bird because it permanently marked the paint!
I managed to recover it quite a bit with t-cut but never got it back 100% and with the recent heat its "popped"
So now I'm assuming I t-cut too deep and comprimised the clear coat?
So before the cold weather sets in (last thing I need is water getting between the lacquer and paint then freezing) I want to try to recover it!

So... would I be successful to just wet sand the damaged lacquer and give it a rattle can coat of lacquer or would this be more of a bodyshop job? The total visible damaged area is only 3 or 4 cm across!

Also don't know what's happened but the water marks seen in the picture are not water marks! They don't wash off, and are all down the front wing too!
im thinking some chemicals have been spilled somewhere and then splashed onto my truck, burning the finish?
so before getting too giddy with the t-cut again and risking damaging the lacquer even more anyone got any suggestions?
 

·
Administrator
Joined
·
5,052 Posts
Discussion Starter · #4 ·
Cheers guys
@landmannnn The comment about the cement might carry a fair bit of weight!
there a quarry next to where I work and when the weather's right (or wrong depending on how you look at it) the dust gets everywhere! To the point I once wiped the windscreen wipers and scratched hell out the glass.
Thinking if the dust had settled then someone drove past and splashed a puddle? All the ingredients are there!
Anyway I'm going to look into a polisher for the future but in the meantime my priority is to get the damaged lacquer patched up. If a chips away company is only gonna be £150 (I thought they would be much more) I'll probably go down that route. At least I'll know it's done right and saves the risk of me cocking it up even further!
Every time I try to paint, every fly in Yorkshire seams to want to land on it lol!
 
1 - 2 of 2 Posts
Top