Nissan-Navara.net banner

1 - 10 of 10 Posts

·
Registered
Joined
·
1,319 Posts
you will probably need new ones as the mating face on alloys is normally different to steel wheels
 

·
Registered
Joined
·
804 Posts
Just fitted some to mine and they use the same nuts as the standard alloys. Both have the same angled seat.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #10
Not sure on the taper. They were the standard ones that came from Nissan for the standard alloys that were on. I have a bag with 4 in still as it had locking wheel bits on the alloys
 
1 - 10 of 10 Posts
Top