Nissan-Navara.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
well hello again,
my jop is car audio installations and i have two clients and very good friends that owns both Nissan Navara Aventura .i have replace the factory screen and install Pioneer touch screen,evrething is working ok except from the steering wheel radio controls,can some give us a help here?
Thank you All Nicos
 

·
Administrator
Joined
·
13,140 Posts
well hello again,
my jop is car audio installations and i have two clients and very good friends that owns both Nissan Navara Aventura .i have replace the factory screen and install Pioneer touch screen,evrething is working ok except from the steering wheel radio controls,can some give us a help here?
Thank you All Nicos
I have moved your post to the interior modifications section.

Just to be clear, as there were model differences, did these Aventuras orginally come with the sat nav screen which you have replaced with Pioneer double DIN head units? Similar to this? https://www.nissan-navara.net/151-interior-modifications/100106-pathfinder-aftermarket-radio-install-sat-nav-double-din-conversion.html


Somebody else had a similar problem https://www.nissan-navara.net/151-interior-modifications/90882-sat-nav-double-din-d40-adventura-2.html
 

·
Super Moderator
Joined
·
4,572 Posts
Dont know about your head unit but i recently fitted a android unit and after a bit of research i found the steering wheel controls are resistive using 3 wires that are found in the main radio harness.
Blue is the common
With white and pink been the key wires!
On my android i connected the blue to ground/negative and the white and pink to key 1 and key 2 and it worked a treat.
Hope that sheads a bit of light on your issue
 
1 - 3 of 3 Posts
Top