For some reason when i am driving, when using the indicators the flash really fast like a bulb has blown then when I stop to check all seems ok and they work normaly??
Any help?
Thanks, Thomas
Any help?
Thanks, Thomas
Indicators are playing funny buggers!
NNMan
1 - 5 of 5 Posts
Joined
·
2,986 Posts
Hi Thomas,
This may help you, when I bought mine I noticed on the service sheets repeated work on the indicators by the Nissan garage.
When I finally replaced the engine and got it on the road,the indicators and hazard lights were really erratic, working one day not the next, the situation got much worse when I connected my trailer.
Then I smelt smoke.
It turned out to be part of the loom had rubbed right through on a very poorly finished and very sharp metal support behind the dash, just where a cable tie secured it.
If you look through the posting titles for :
'Now the b*****d has caught fire'
You will be able to see the photos I took showing you exactly where to start your investigations?
As I said this may help or you may have a different problem.
regards,
Chris
This may help you, when I bought mine I noticed on the service sheets repeated work on the indicators by the Nissan garage.
When I finally replaced the engine and got it on the road,the indicators and hazard lights were really erratic, working one day not the next, the situation got much worse when I connected my trailer.
Then I smelt smoke.
It turned out to be part of the loom had rubbed right through on a very poorly finished and very sharp metal support behind the dash, just where a cable tie secured it.
If you look through the posting titles for :
'Now the b*****d has caught fire'
You will be able to see the photos I took showing you exactly where to start your investigations?
As I said this may help or you may have a different problem.
regards,
Chris
Hi, had excatly the same problem myself, drove me mad!!!
I took the side repeaters apart and found a fair amount of damp mud and dirt had got inside, past the rubber seal. Simply just cleaned it all out and dried it off and never had a problem since.
Hope this helps, Matt
I took the side repeaters apart and found a fair amount of damp mud and dirt had got inside, past the rubber seal. Simply just cleaned it all out and dried it off and never had a problem since.
Hope this helps, Matt
1 - 5 of 5 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
