sheepy said:
http://www.nissan-navara.net/viewtopic.php?f=7&t=5474&hilit=service+interval+reset
This may explain better what I was trying to say.
:shock: its gone in 3 sec :shock:
the wrench symbol Goneee
:happy0071 thx a lot everyone :cheers2:
To change the service reminder screen do the following.
Turn the ignition switch on and the service screen will pop up. While this screen is showing press and hold the trio odometer/trip computer reset knob for more than 3 seconds. The wrench symbol and distance display will start to flash and the display will show the current interval. Rotate the reset knob anticlockwise to decrease the intervals or clockwise to increase the intervals. It can be changed in 1,000km or 500mile intervals. Once the desired distance is showing just leave it for about 5 seconds and it will change to odometer/trip meter screen and your all done.
The maximum interval distance setting is 40,000km or 25,000 miles and the minimum interval is 0.
If you select 0 then the schedule function will be disabled in which case when you turn the key on it will not show this sceen and instead go straight to the odometer/trip meter screen.