Nissan-Navara.net banner
1 - 15 of 15 Posts

suryaD91

· Registered
Joined
·
95 Posts
Discussion starter · #1 ·
Hello Everyone, i wonder what happen to my d40..theres a Fix Icon came out a few days ago on the top left side... before is start the engine i saw -20 and it get worse to -50 and now its -170.. i check everything and i think the engine run well.only notice that theres a decreasing in OIL. so i add 1 litre of oil(Oil indicator is below Maximum level after i add the Oil). but it didnt help.The Repair icon is still there :dunno :nailbiting
 

Attachments

Hello and :welcome

I belive it is the service indicator, telling that you need one.
Im sure if i am wrong the helpful peeps on here will tell me and you :awesomework
 
Hi and welcome.
I would guess its a service indicator.. Ie your 20-50-170 miles overdue.. Like I say it's a guess but very similar to my old beemer.
 
Discussion starter · #6 ·
hellooo :lol:

sooo , mm..not thinking any service is necessary..maybe i should change the oil.. bought it second hand. but ive replaced almost everything (fuel filter,air filter,oil filter,oil ) and i ve cleaned the Air filter sensor and the Egr
ill bebackk :salute:
 
It is the service indicator and it needs to be manually reset after a service, so just because it is on doesn't necessarily mean there is anything wrong with it, probably just not been reset when the last service was done?
 
Discussion starter · #8 ·
ive reset it at nissan dealer 3000km ago,cause i thought that will fix the blinking Airbag indicator light on my Display.well,it didnt.. the cable was broken.. the parts cost about $200 here .not worth it.. try to look for technician to fix it .cost around $30 :mrgreen:
 
Discussion starter · #9 ·
suryaD91 said:
ive reset it at nissan dealer 3000km ago,cause i thought that will fix the blinking Airbag indicator light on my Display.well,it didnt.. the cable was broken.. the parts cost about $200 here .not worth it.. try to look for technician to fix it .cost around $30 :mrgreen:
:dunno (frgot to mntion)its the cable that connect the airbag and other component to the steering ,
 
When you say you reset it, did you do it by holding the odometer trip switch in as soon as you turn on the ignition (while it is showing the -20, -50, -170 etc)? This is different from the ecu reset that is meant to be done after service/ filter change.
 
Discussion starter · #11 ·
no, i didnt.. 3000km ago when i reset the ecu at the dealer.. and the problem came 270km ago..
my car is definitely Fit n theres nothing to service but if thats the problem..ill go to nissan to have a check :faint
its weird everytime when i turn on the ignition
the km distance gets worse (-10 -20 -70 -300) and then its written down GOOD. :really
thx for the information :thumbright:
 
Discussion starter · #13 ·
sheepy said:
http://www.nissan-navara.net/viewtopic.php?f=7&t=5474&hilit=service+interval+reset

This may explain better what I was trying to say.

:shock: its gone in 3 sec :shock:
the wrench symbol Goneee
:happy0071 thx a lot everyone :cheers2:

To change the service reminder screen do the following.

Turn the ignition switch on and the service screen will pop up. While this screen is showing press and hold the trio odometer/trip computer reset knob for more than 3 seconds. The wrench symbol and distance display will start to flash and the display will show the current interval. Rotate the reset knob anticlockwise to decrease the intervals or clockwise to increase the intervals. It can be changed in 1,000km or 500mile intervals. Once the desired distance is showing just leave it for about 5 seconds and it will change to odometer/trip meter screen and your all done.
The maximum interval distance setting is 40,000km or 25,000 miles and the minimum interval is 0.
If you select 0 then the schedule function will be disabled in which case when you turn the key on it will not show this sceen and instead go straight to the odometer/trip meter screen.
 
1 - 15 of 15 Posts