Nissan-Navara.net banner
161 - 180 of 233 Posts
Discussion starter · #161 ·
This is just going off topic now, I will post pics when I have my bar back from powder coasters and hopefully will have it all done on Sunday.

Rich, if you can let me know when you get chance about the other switches that would be helpful as usual, cheers mate :)
 
Discussion starter · #162 ·
Hi Rich, were you able to post that diode mate?
 
Discussion starter · #164 ·
Cheers mate, I sent you an email to you recycle address, if you can have a look. Ta
 
Discussion starter · #165 ·
Hi lads, on the relay in the drawing below, it has the obvious 87/86/85/30 terminals.

On the drawing which wire goes too which terminal?

Sorry, never claimed to be good at electronics, but i'll have a damn good go :)
 

Attachments

Google is your friend...but to help you out and me having a lazy moment I've borrowed a picture from google...


[attachment=0:3mkhs8q9]image.jpg[/attachment:3mkhs8q9]
 

Attachments

Discussion starter · #167 ·
Hi Carts,

Cheers buddy, according to that then, is this correct, have put the numbers on the wires from the relay.
 

Attachments

That's spot light on.... :really
 
Discussion starter · #169 ·
HA, cheers matey!
 
Well today's the big day!

And today :0ttiwwop of the finished work not just the lights fitted but working :jawdrop
 
Sunday, Sunday looks good to me. Now remember talks cheap, it's actions that count mate.
 
Discussion starter · #172 ·
No excuses, just didn't manage to do it as the light bar wasn't completed by the power coaters in time.

Sorry guys.
 
I am calling ******** on that one. You could have done all the under hood and behind dash hook ups mate. That way when you fit the bar next week it's only a matter of running the spotlight cable and hooking to the relay. All the diode, switch work etc has already been done. Sorry mate but that's what I would have done.
 
Discussion starter · #174 ·
Yeah, cheers for that insight.

I didn't have the bar so I didn't do it as I said, no excuses, I did other stuff to my navara instead.

I took off the SnugTop and and re fitted with new rubbers on the bed and siliconed the holes at the back corners where water was getting in, also replaced the rubber around the rear window ont the Snug Top as this had perished and fitted new rubber seals all over the tailgate door so now the back is nice and water tight. Then I fitted a 12v DC power outlet in there as well and a new centre internal LED light that I have just got to wire to a push button swith (as it was now dark and freezing) so the light will come on automatically when I open the rear glass window/door.
 
Cheers for that Mark, BUT your fan club wanna see lights mate. Give us light porn, com'on you know you want to.
 
Discussion starter · #176 ·
Well, I have just collected my light bar (on a break :really ), powder coded Matt Black, will take some picks and post :) definately looks the part.

I also finished mirror polishing my soon to be fitted stainless steel silver roof bars :) (much effort :( but worth it :) ) also will take pics and post.

Rubbish shifts this week, doing 7 till 7 so will be weekend for fitting, hopefully get roof bars on as well!!
 
Trust me mate it will surprise you how long it takes to do the wiring. Assuming you want to do it neatly and heat shrink and split conduit everything. Lights did somebody say lights
 
Discussion starter · #178 ·
Here's my light bar :)
 

Attachments

getting there, just missing 4 spots and a truck.. :eek:ops not far to go now... is that light at the end the tunnel I see... :jawdrop
 
Discussion starter · #180 ·
Does anyone know off the top of there head if the front roof bar foot mount is soild or is there a cavity underneath it, that could say fit a wire connector or is there no room?
 
161 - 180 of 233 Posts