Hi guys, anyone over on club-frontier will pribably already have seen this, but thought id post it up here too for those than aren't. Picked my Nav up last Saturday, had a pretty solid week of modding it!
Current mods done;
Interior
Audio;
Pioneer SPH-DA100 Head unit
Rockford fosgate T600-2 amp for subwoofer
Rockford fosgate T400-4 for door speakers
Rainbow Vanadium 10" subwoofer
Rainbow Sl-C6.2 front comps
Rainbow SL-C6.2 rear comps
Sound deadened
Reversing camera
Seat heater's fitted
Carling switches throughout, colour changed to white and red indicator
White dash LED's
Roof console converted to switch panel
Dome lights converted to SMD panels
Custom fuse and relay box to power accessories
Exterior
Lighting;
Projector headlights
55w HID's in dipped and hi beam, 120w in headlights.
45" LED roof bar
70w HID converted Hella Luminator REF50. spots
Fogs converted to 35w HID's
2 x 40w LED reversing lights
Telescopic rear flood LED lights Grill swap
Additional stop tail indicators in rear bumper
Safari Snorkel
Bedlined
Drivetrain
ARB front locker
ARB rear locker
Regeared to 3.69 (Its an auto)
All breathers extended up snorkel
Suspension & Tyres
4" of lift
PSR +4" adjustable coilovers
PSR adjustable UCA's
Custom rear leaf pack
FOX 10" travel remote res rear shocks on order
33" BFG K02 tyres
Armour
Full custom made skid plating
ARB front bumper
Custom made rock sliders
Custom made rear tyre carrier bumper with tub side protection
Gear and Other
Albrecht remote head CB radio
Dual battery system
National Luna dual battery management system
Warn VTC compressor and 25L tank
Heatshot headed washer jet system
Amber strobe lights
Goodwinch TDS9.5 front winch with custom air freespool and BOW2 uprated motor
ARB 48L Fridge freezer
Van vault gear safe bolted in rear
Toolbox bolted in rear
Planned
Rear canopy, full length rack and roof tent.
Bed drawer/storage system in progress
Maybe non of the above and go for an Aussie style tray and ally lockers.
A bit about me. I'm a young Engineer (24) from Newcastle.
First off, i'll apologise for the variation in photo quality, i dont often remember my proper camera when i go to work, so its a combo of those and iphone pics.
So, i just picked my truck up last week after a few months of trying to find the right one, and collecting parts!
I've spent a week on it and progress is pretty rapid so far, so i'll post upto where I'm at so far.
So, the truck as i bought it;

How she looks now (November 2015)
First mod was to pull the horrible stock headunit out, and in with a Pioneer App radio, love this thing;


Next was the CB radio. Its an albrecht ae 6890, which has a remote front panel. So the front is mounted under the dash, like so;

I'll grab some more/better photos of this tomorrow
And the main unit is in the centre console.
Tow hitch was next, which unfortunately fowled the rear step, so some modding was done to that to get it to fit.



Not quite finished yet, im thinking of refitting the plastic trim over the top ofter I cut it to shape.
Next was roof lights, i went with PIAA SMR 520's. 2 driving and 2 fog. Making the roof bar was fun, not the easiest shape things to make neat, the plasma cutter came into its own here!






Headlight swap was next, just the generic projector lights


And the latest addition was the dual battery system. The battery is just held with a strap for the time being till my Warn VTC compressor arrives and i'll see how im going to mount the pair together.








How it stands now;

I've got a winch which i've rebuilt to go on, however I'm not sure if I'm going to have room for it when its hidden, im not sure if its because its an auto, but my rad is pushed waayy further forwards than the manual one i have as a company car, as a result, i have barely any room behind the bumper.
Rich
Current mods done;
Interior
Audio;
Pioneer SPH-DA100 Head unit
Rockford fosgate T600-2 amp for subwoofer
Rockford fosgate T400-4 for door speakers
Rainbow Vanadium 10" subwoofer
Rainbow Sl-C6.2 front comps
Rainbow SL-C6.2 rear comps
Sound deadened
Reversing camera
Seat heater's fitted
Carling switches throughout, colour changed to white and red indicator
White dash LED's
Roof console converted to switch panel
Dome lights converted to SMD panels
Custom fuse and relay box to power accessories
Exterior
Lighting;
Projector headlights
55w HID's in dipped and hi beam, 120w in headlights.
45" LED roof bar
70w HID converted Hella Luminator REF50. spots
Fogs converted to 35w HID's
2 x 40w LED reversing lights
Telescopic rear flood LED lights Grill swap
Additional stop tail indicators in rear bumper
Safari Snorkel
Bedlined
Drivetrain
ARB front locker
ARB rear locker
Regeared to 3.69 (Its an auto)
All breathers extended up snorkel
Suspension & Tyres
4" of lift
PSR +4" adjustable coilovers
PSR adjustable UCA's
Custom rear leaf pack
FOX 10" travel remote res rear shocks on order
33" BFG K02 tyres
Armour
Full custom made skid plating
ARB front bumper
Custom made rock sliders
Custom made rear tyre carrier bumper with tub side protection
Gear and Other
Albrecht remote head CB radio
Dual battery system
National Luna dual battery management system
Warn VTC compressor and 25L tank
Heatshot headed washer jet system
Amber strobe lights
Goodwinch TDS9.5 front winch with custom air freespool and BOW2 uprated motor
ARB 48L Fridge freezer
Van vault gear safe bolted in rear
Toolbox bolted in rear
Planned
Rear canopy, full length rack and roof tent.
Bed drawer/storage system in progress
Maybe non of the above and go for an Aussie style tray and ally lockers.
A bit about me. I'm a young Engineer (24) from Newcastle.
First off, i'll apologise for the variation in photo quality, i dont often remember my proper camera when i go to work, so its a combo of those and iphone pics.
So, i just picked my truck up last week after a few months of trying to find the right one, and collecting parts!
I've spent a week on it and progress is pretty rapid so far, so i'll post upto where I'm at so far.
So, the truck as i bought it;

How she looks now (November 2015)




First mod was to pull the horrible stock headunit out, and in with a Pioneer App radio, love this thing;


Next was the CB radio. Its an albrecht ae 6890, which has a remote front panel. So the front is mounted under the dash, like so;

I'll grab some more/better photos of this tomorrow
And the main unit is in the centre console.
Tow hitch was next, which unfortunately fowled the rear step, so some modding was done to that to get it to fit.



Not quite finished yet, im thinking of refitting the plastic trim over the top ofter I cut it to shape.
Next was roof lights, i went with PIAA SMR 520's. 2 driving and 2 fog. Making the roof bar was fun, not the easiest shape things to make neat, the plasma cutter came into its own here!






Headlight swap was next, just the generic projector lights


And the latest addition was the dual battery system. The battery is just held with a strap for the time being till my Warn VTC compressor arrives and i'll see how im going to mount the pair together.








How it stands now;

I've got a winch which i've rebuilt to go on, however I'm not sure if I'm going to have room for it when its hidden, im not sure if its because its an auto, but my rad is pushed waayy further forwards than the manual one i have as a company car, as a result, i have barely any room behind the bumper.
Rich