Nissan-Navara.net banner
4,721 - 4,740 of 5,680 Posts
Replaced headlamp bulbs with Philips X-treme Vision (+130%). A noticeable difference.
Replaced all the interior lights with LEDs (2 x 501's and 1 x 33mm festoon). Much better lighting.
Added a Bluetooth ODBII adaptor and downloaded the Torque app for my mobile.


Then took a couple of tonnes of earth (several trips) to the tip. A busy weekend...
 
Replaced headlamp bulbs with Philips X-treme Vision (+130%). A noticeable difference.
Replaced all the interior lights with LEDs (2 x 501's and 1 x 33mm festoon). Much better lighting.
Added a Bluetooth ODBII adaptor and downloaded the Torque app for my mobile.


Then took a couple of tonnes of earth (several trips) to the tip. A busy weekend...
How easy was it to get into the interior light fittings? Have you a link for the bulbs?

Sent from my E5823 using Tapatalk
 
The light covers just pop out. You need a flat bladed screwdriver or a knife just to help pry them out.

The LEDs are all from Amazon.

The 501's are the standard push fit with the plastic tab as per sidelights.
https://www.amazon.co.uk/gp/product/B01K6UBK3E/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1


The 33mm festoon bulbs were the only ones on Amazon I could find, but arrived after a couple of weeks and do the job. https://www.amazon.co.uk/gp/product/B00AV1FU0I/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
 
Replaced the front prop shaft UJ's after months of putting it off. Was a bit of a pain in the neck to do but finally no horrible "scratchy squeaky" noise on deceleration. Became so loud in the end people turned their head's in town :D. Replaced with greaseable UJ's from Milner's
 
Re-map

Finally got round to booking truck in for a re-map, gotta bit of a wait though unless a cancellation comes up.
 
Looks great!

If you don't mind me asking, what power did you tap into, and what did you do for a switch? Also, would you mind posting a link to the lights you used?

Thank you
I pulled a fused supply straight from the battery into a little junction box in the tub. I have these lights, a 12V power supply and work lights powered off it. Still capacity for a compressor at a later date. Switches are just carling switches mounted on the front of the JB just inside the tailgate on the left.
 
To pathfinder, please could you tell me what size k02 tyres did you fit to those wheels and how do you find them for noise. I am looking to fit the same.
Many Thanks.
Sorry mate just saw your post.They are 265/65/18 and i hardly found any difference in noise compared to the stock ones.The previous model ko were more noisier and believe me i am a noise freak when comes to cars.Inwould highly recommend them
 
4,721 - 4,740 of 5,680 Posts