Nissan-Navara.net banner
1 - 17 of 17 Posts

JB21CAM

· Registered
Joined
·
214 Posts
Discussion starter · #1 ·
Hey Guys n Gals,

I need some advice/trouble shooting help please..... Today I got caught on that dreaded hill that people don't know how to drive on towing a heavy weight again! After slipping the clutch a bit trying to pass this scared lady in a 16 plate smart car I got fed up of smelling clutch and thinking of said damage, so I put it in 4 low or tried at least! So the truck goes in to 4 hi no probs but when selecting 4 lol it just keeps flashing 4 lol and won't select it. I've tried forward backwards soft ground, hard ground, gear changes the lot! No avail. Could this have something to do with the rattling I reported coming from above sump/gearbox?
 
It's unusual for them not to select 4 lo, it's getting out of 4wd back to 2wd that can be awkward.

  • I assume you were stationary in neutral when you tried to select it?
  • Have you used 4 lo before?
  • Have you tried to select it since this incident?
 
Discussion starter · #5 ·
No amber waning light which is why I find it so strange!!
 
Discussion starter · #7 ·
I can't get it in to 4lo at all. It does 2wd and 4 hi fine ? Bit confuddled
 
I get it now.

The next thing to try is to see if it is trying to engage 4lo.

Ignition on, engine off, windows open, select 4hi, you will hear a click as it engages.

Now try 4lo. You should be able hear an electric motor trying to engage the gear.
 
Discussion starter · #9 ·
Yes for 4 hi no for 4 lo ?

I get it now.

The next thing to try is to see if it is trying to engage 4lo.

Ignition on, engine off, windows open, select 4hi, you will hear a click as it engages.

Now try 4lo. You should be able hear an electric motor trying to engage the gear.
 
Discussion starter · #16 ·
Thanks guys will have to trouble shoot this weekend if poss
 
1 - 17 of 17 Posts