Nissan-Navara.net banner
Cancel
Create thread New Garage Forums

Steel wheels

Jump to Latest
1 - 20 of 47 Posts
#2 · (Edited)
The d40 navara and pathfinder are a unique pcd/ stud diameter
The only steels you will find are custom made for them or the standard wheels are steel so you could get 4 of them?
but since they spend most of there life under the back of a truck youll be hard pushed to get any that dont need a refurb
The spares were all 16" and be carefull when looking cos after a quick ebay search ive found theres loads on there for the d22 they look very similar but wont fit on a d40
 
Save
Reply Quote Like Like
Discussion starter · #3 ·
Thank you. I was finding similar things and thought it was just me. May go for a spare set of standard ish alloys and get them dipped as chrome. Yes chrome. I know most like to dechrome but I like it in moderate amounts.


Sent from my iPad using Tapatalk
 
#4 ·
stephen.anyfix said:
Thank you. I was finding similar things and thought it was just me. May go for a spare set of standard ish alloys and get them dipped as chrome. Yes chrome. I know most like to dechrome but I like it in moderate amounts.


Sent from my iPad using Tapatalk
Click to expand...
Nowt wrong with chrome rims if that's your thing
Whats your plan on getting them chromed?
Ive tryed many "chrome" paint and nothing really comes close
 
  • Like
Reactions: stephen.anyfix
Save
Reply Quote Like Like
#11 ·
Standard offset is ET30.

So depending on the width of your new tyres, you may have to modify this if you are really concerned about arch protrusion.
 
#13 ·
That's only 10mm wider tyre than standard. So if you maintained the ET30, I highly doubt anyone would even notice a difference in protrusion. You would never see 5mm, since the extra width is split each side.
 
#14 ·
mrw27 said:
That's only 10mm wider tyre than standard. So if you maintained the ET30, I highly doubt anyone would even notice a difference in protrusion. You would never see 5mm, since the extra width is split each side.
Click to expand...
ok im with you so would you recommend going with the et30 off set on the steel modular wheels i was thinking of going a bigger tyre later on tho maybe 285 75/16 or possibly 33s ???
 
#15 ·
285 is still only 15mm extra width each side of wheel centre, so nothing will protrude to any silly level.

You will need new wheels when you jump to 33" total diameter, otherwise on 16s you will end up with sidewalls the size of a bouncy castle skirt!
 
#16 ·
mrw27 said:
285 is still only 15mm extra width each side of wheel centre, so nothing will protrude to any silly level.

You will need new wheels when you jump to 33" total diameter, otherwise on 16s you will end up with sidewalls the size of a bouncy castle skirt!
Click to expand...
ok cool thanks for the info so im gonna order black steel modular 16/8 et30 off set hopefully should look pretty good
 
#18 ·
Check out these wheels! And that's with 1 foot arches:


64240




Might be a slight bit of tyre howl on the tarmac with these....!

Not my truck I should add - it belongs to an Australian.
 
1 - 20 of 47 Posts
About this Discussion
46 Replies
7 Participants
Last post:
markdavies
Nissan-Navara.net
posts
490K
members
41K
Since
2006
A forum community dedicated to Nissan Navara owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, maintenance and more!
Full Forum Listing
Explore Our Forums
Questions & Answers (D40 Diesels) Navara Chat Introduce yourself Questions & Answers (YD25 & TD25 2.5 Diesel) Exterior Modifications