Nissan-Navara.net banner
1 - 20 of 90 Posts

navara1

· Registered
Joined
·
2,159 Posts
Discussion starter · #1 ·
D40 + D22 brake discs, solids, drilled, grooved, and drilled and grooved rotors. :)

I don't think the price is bad at all, there is a pair i like the look of.




http://www.twenga.co.uk

type in the search navara brake discs. :thumbleft:
 
Discussion starter · #2 ·
I have ordered the 40 Groove has they may not crack like the drilled ones do. would be intresting on some comments from you all. ÂŁ60+ cheaper than the Rossini
 
navara1 said:
I have ordered the 40 Groove has they may not crack like the drilled ones do. would be intresting on some comments from you all. ÂŁ60+ cheaper than the Rossini
Lee you will change them already??
 
Discussion starter · #4 ·
Yes there ready for a change, I do a lot of miles daily. Last year in the nav I did 60.000 miles and in the same year I did 67.000 miles in the sprinter. But the nav gets some hammer every time it's out. The 190ps nav I have has done 37,000 miles already, of which I might of done 100 miles in it myself.
 
navara1 said:
Yes there ready for a change, I do a lot of miles daily. Last year in the nav I did 60.000 miles and in the same year I did 67.000 miles in the sprinter. But the nav gets some hammer every time it's out. The 190ps nav I have has done 37,000 miles already, of which I might of done 100 miles in it myself.
i was ready to buy these from twenga/ebay with a set of greenstuff but here in Greece we have 296mm diameter...and these are 320mm so..
 
Discussion starter · #6 ·
They do that size too. The reason I'm going for grooved only is that I have had two sets of Rossini and where the drill holes are they have cracked bad. This Is due to the weight of the truck and the heat that gets put in them. Rossini replaced the first set but the second has done it again ?
 
navara1 said:
They do that size too. The reason I'm going for grooved only is that I have had two sets of Rossini and where the drill holes are they have cracked bad. This Is due to the weight of the truck and the heat that gets put in them. Rossini replaced the first set but the second has done it again ?
so the best way for our trucks its grooved only??
 
Discussion starter · #8 ·
In my experience with the Rossini disc the drill holes cracked to each other twice. After plenty of discussion, I'm with the top performance guys that grooved is the way.
 
navara1 said:
In my experience with the Rossini disc the drill holes cracked to each other twice. After plenty of discussion, I'm with the top performance guys that grooved is the way.
thanks man..i've asked them if they are making 296mm dimeter and i'm waiting..
 
Discussion starter · #10 ·
Going to pick my discs tomorrow, choose of the 40 groove or some groove and dimple discs. The guy there says there the ones to have. So I'm of to meet them and inspect for my self. The discs are part drilled not fully. Also been given some 4 pots off a evo8. With some luck it should stop.
 
navara1 said:
Going to pick my discs tomorrow, choose of the 40 groove or some groove and dimple discs. The guy there says there the ones to have. So I'm of to meet them and inspect for my self. The discs are part drilled not fully. Also been given some 4 pots off a evo8. With some luck it should stop.
It will be great Lee.
Just look if the EVO rotors are the same dimensions as the one that you will buy.
We are waiting some pictures.
 
Discussion starter · #12 ·
Before the evo callipers are modded, fitting new pertek hoses, discs and pads and changing fluid to 5.1. Just to see if there is a big improvement has the more power I get the crapper the brakes are.
 
JOHNVOR said:
Its 114.99 for both rotors or for the one?
Tgiannak have you more info for us?
no and i can't find 296mm diameter...i find only 320mm at very good prices...the only site i found 296mm its http://www.nt.gr that's the link you're talking about??
 
navara1 said:
I'm phoning him this morning on another job. I will get you a answer on the 296mm discs.
thanks Lee...if my car was 320mm it will be a dead easy job to do...
 
Discussion starter · #19 ·
The guy sends 296 discs alot to Greece. As near all navs there have the 296mm discs he says. He's ringing me back later today with price to Greece for you.
 
navara1 said:
The guy sends 296 discs alot to Greece. As near all navs there have the 296mm discs he says. He's ringing me back later today with price to Greece for you.
special!!! we are talking about grooved only is that right??? and how many grooves?? :idea:
 
1 - 20 of 90 Posts