Nissan-Navara.net banner
1 - 5 of 5 Posts

IrishPete

· Registered
Joined
·
3 Posts
Discussion starter · #1 ·
So my 2015 D22 Navara (2.5 diesel here in Australia) has basically stopped running. It starts and idles, but dies under load.

I took a punt and replaced the MAFS. No difference.

Dropped it to a mechanic, and they've done some preliminary investigations, and the error code their scanner shows is to do with the MAFS.

Any ideas what it could be that replacing the MAFS did not solve?
 
So my 2015 D22 Navara (2.5 diesel here in Australia) has basically stopped running. It starts and idles, but dies under load.

I took a punt and replaced the MAFS. No difference.

Dropped it to a mechanic, and they've done some preliminary investigations, and the error code their scanner shows is to do with the MAFS.

Any ideas what it could be that replacing the MAFS did not solve?
First thing, the engine should run if you disconnect the MAF. (It doesn't run that well, but should be driveable)



Do you know the fault code? Worth buying a basic code reader by the way, they are not expensive.



Could it be the MAPS sensor? (Sounds similar to the MAF sensor)
 
Discussion starter · #3 ·
First thing, the engine should run if you disconnect the MAF. (It doesn't run that well, but should be driveable)



Do you know the fault code? Worth buying a basic code reader by the way, they are not expensive.



Could it be the MAPS sensor? (Sounds similar to the MAF sensor)
No, they didn't tell me the fault code. But it was definitely Mass Air Flow Sensor, because he mentioned that he noticed that I'd replaced it.
 
1 - 5 of 5 Posts