No luck yet !

 

Are you using a standard combination lighting stalk?
I.E. the fog light switch is on the same stalk as the main light switches?
If so have you put a relay in the standard loom?
Tight ba**ards at Nissan saved a few pennies by wiring in a fog lamp relay socket, then leaving it blank.
If you are using the standard loom it will not work until you fit a relay.

 

Thats proberbly why my fog never worked, i lways take the damn thing off after mot.

 

The only fog light switch on the stalk is for the rear one !
The kit came with the new switch and relay that attaches near the battery.

 

D22's do come already wired up for front fogs, the ends are taped up behind the bumper, near where the lights are fitted.
They just need the switch and a relay to power the circuit.

 

D22's do come already wired up for front fogs, the ends are taped up behind the bumper, near where the lights are fitted.
They just need the switch and a relay to power the circuit.

:+1 yes they do, thats where i found mine, then just fitted them straight into the holders that where already in place, wired up the switch & off i went. :thumbright: