2020 NP300 YSD23TT
alright so, recently i’ve had to drain the coolant to repair a leaking coolant hose. all went fine and vac filled the cooling system afterwards. now im getting the egr coolant pump fault code P24A8. have attempted to bleed the system multiple times, have cracked all bleed points and followed the workshop manual etc. still no luck whatsoever, the heaters get hot as they should and all the cooling pipes are hot to the touch when at operating temperature which is sitting around 84 - 86 degrees celsius which it has always been at. never had this code before draining the coolant. both pumps are definitely working and can’t find any air pockets at all. got me stumped on what to do next as i’m not dealing with nissan again. someone on here mentioned there was a part in the workshop manual where it relates directly to this fault code but i can’t find it for the life of me. any ideas would be amazing
alright so, recently i’ve had to drain the coolant to repair a leaking coolant hose. all went fine and vac filled the cooling system afterwards. now im getting the egr coolant pump fault code P24A8. have attempted to bleed the system multiple times, have cracked all bleed points and followed the workshop manual etc. still no luck whatsoever, the heaters get hot as they should and all the cooling pipes are hot to the touch when at operating temperature which is sitting around 84 - 86 degrees celsius which it has always been at. never had this code before draining the coolant. both pumps are definitely working and can’t find any air pockets at all. got me stumped on what to do next as i’m not dealing with nissan again. someone on here mentioned there was a part in the workshop manual where it relates directly to this fault code but i can’t find it for the life of me. any ideas would be amazing
