[Jamie 1392]

I've just bought my first d22 and on my way home it broke down, it lost power and just cut out it started straight away but the full pick up was rattling and only drove for about 500 yards before doing the same. my mate plugged his computer in and it came up accelerator position sensor, water temp sensor, Egr volume control sensor,turbo pressure and finally injector pump communication line if anyone could help here it would be much appreciated not sure if one is throwing them all out but he tried to clear them without success.

 

[lookskyward1]

A normal code reader cannot connect with the Nissan D22 computer. Any codes are likely to be complete red herrings.

I take it you are aware of the problems regarding the bottom end on the D22 YD25 engine?

The seller did well to dodge this, was it a private or trade sale?

This could turn in to a bit of a long drawn out process, pop in to the 'Introduce yourself' section to tell us more about your new toy and yourself,(include your location). You'll get a warm welcome and we will be in a better position to offer help. :thumbright:

 

[pdfisher]

A normal code reader cannot connect with the Nissan D22 computer. Any codes are likely to be complete red herrings.

I take it you are aware of the problems regarding the bottom end on the D22 YD25 engine?

The seller did well to dodge this, was it a private or trade sale?

This could turn in to a bit of a long drawn out process, pop in to the 'Introduce yourself' section to tell us more about your new toy and yourself,(include your location). You'll get a warm welcome and we will be in a better position to offer help. :thumbright:

:+1 :welcome

 

[fatha]

If it's accelerator sensor, just lift your foot off and press again, it should pickup again and drive normally for a bit.