Hello everyone this is my first post and sorry to say i need your help. I have a navara on the 05 plate its a auto aventura. It has been great so far i have had no problems but two days ago the indicators stopped working on the passenger side. I have checked the lamps and the fuses well the ones i can find, in the glove box and two sets under bonnet but still no go. Have anyone on here had this problem i would be very grateful for any help thanks very much.
Help Indicator problem
sharksfinn
1 - 12 of 12 Posts
Joined
·
14 Posts
Hello everyone this is my first post and sorry to say i need your help. I have a navara on the 05 plate its a auto aventura. It has been great so far i have had no problems but two days ago the indicators stopped working on the passenger side. I have checked the lamps and the fuses well the ones i can find, in the glove box and two sets under bonnet but still no go. Have anyone on here had this problem i would be very grateful for any help thanks very much.
Joined
·
14 Posts
Hi no they dont just the drivers side work
Joined
·
14 Posts
Ok everyone i have sorted the indicator problem and heres how incase anyone else needs to no in the future. firstly i checked the lamps all ok then all the fuses all ok then i removed all the relays from under bonnet still not working on passenger side. Next i removed two screws that hold cover on around stalks in the cab. I then removed stalk by depressing two clips and it slid out. Pressed the hazard switch still not working passenger side. I then noticed some what look like Cpu above the pedal area so one by one i unpluged the conectors and pluged them back in again tried the indicators now working something must have reset when i unpluged the connectors just lucky this time by a process of elimination. I did phone local nissan dealer they said they had never had that problem before best to bring it in. Glad to say for now i dont have to.
Joined
·
14 Posts
I think there is two maybe three boxes above pedals i dont no what one is the BCM i just unplugged them all. So thank you as i now no thats were the switch inputs are thank you zeph1320.
Joined
·
1 Posts
Possibly not the same issue being the vehicles are different but I will explain how I fixed my front left hand indicator problem.
My vehicle is a 2011 Thai built Nissan Navara STX King cab D40.
After searching all four fuse boxes for an indicator fuse (there is none located in any of them) I thought that I would try the hazard lights and could hear a clicking noise in front of the battery. I pulled the wiring up to access what I found to be 2 relays and only one was clicking 😏 I swapped them over and the passenger indicator started flashing. Luckily I had a spare with me.
Joined
·
102 Posts
That usually happens if a bulb is blown or you have changed the bulbs over to LEDS as they need resisters ,
Yep if changed to led you need to put resistors on indicator circuit, re crook indicator had one not working and found wire had been cut and joined badly in drivers door sill but certainly took some finding as an unlikely spot.
Joined
·
1 Posts
Reseating BCM worked for me thanks
1 - 12 of 12 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
