[frankiedj]

I have a 1990 Nissan Navara 4 wd ute with broken front wheel studs (2) . I have attached 3 phots but need assistance on how to remove the 2 broken studs and put new ones back in. The section the studs are located I assume will come off but I cannot see how. Can anyone assist please

 

[landmannnn]

Yep, you need to get the hub off and hammer the studs out to the rear. Everything will be a bit stuck together!

 

[gfromleeds]

Yep, you need to get the hub off and hammer the studs out to the rear. Everything will be a bit stuck together!

As landmannnn said they just hammer through but you'll probably have the strip the hub down to give clearance behind!
The replacement studs are available individually and just push through the hole and pull up tight by bolting the wheel nut on